Reference catalogs · instrument mechanism
Bolted Joint Strength Calculator mechanism
The inspectable method record for Bolted Joint Strength Calculator, kept separate from implementation and qualification.
Model scope
The instrument can be labeled only as a simplified static axial-joint calculator unless the missing shear, safety-factor, separation, stiffness, and torque definitions are added. The torque outputs above are explicitly conditional on K=0.2 and are not independently justified by the supplied specification.
- σ=F/At is correct for nominal axial bolt stress only; it does not calculate shear stress, combined loading, thread stripping, bending, or stress concentration effects.
- The preload relation Fi=0.75·Fproof is a stated typical simplification, not a universal design rule. Proof strength is a stress, so preload force must be calculated as Fi=0.75·Sproof·At.
- The stiffness relation C=kb/(kb+km) is correct for compatible stiffness units and a linear elastic concentric joint, but the specification does not define how kb and km are obtained.
- Joint separation requires an explicit criterion and load model. For a concentric tensile external load P, the usual simplified criterion is Psep=Fi/(1-C), but this is not stated.
- No formula is supplied for the claimed joint safety factor. The vectors use the conditional definition SF=Sproof/σbolt; yield, ultimate, fatigue, slip, separation, and proof-load criteria could produce different safety factors.
- No formula is supplied for recommended torque. A torque estimate requires an explicit nut factor K and nominal diameter, typically T=K·Fi·d, and is highly dependent on friction, lubrication, threads, and bearing surfaces.
Units and conventions
- Stress and proof strength are in MPa with tensile stress area in mm² for metric vectors; 1 MPa·mm²=1 N.
- The stiffness values kb and km use the same force-per-length units, so C is dimensionless.
- External applied load P is an axial tensile load shared by one bolt and the joint model is concentric and linear elastic.
- The conditional torque calculation uses dimensionless nut factor K and nominal bolt diameter d; metric torque is N·m and inch torque is lbf·in unless converted.
- The conditional safety factor is against proof stress only: SF=Sproof/σbolt.
- No shear load is included in these vectors because the specification does not define a shear-area method.
Inspectable vector
One of 4 source-bound review vectors:
{
"inputs": {
"bolt": "M10 x 1.5",
"grade": "ISO property class 8.8",
"applied_axial_load_N": 20000,
"tightening_method": "nut-factor estimate",
"K": 0.2,
"nominal_diameter_m": 0.01,
"kb_N_per_mm": 100000,
"km_N_per_mm": 900000
},
"expected_outputs": {
"tensile_stress_area_mm2": 58,
"proof_strength_MPa": 600,
"preload_N": 26100,
"C": 0.1,
"bolt_load_N": 28100,
"bolt_tensile_stress_MPa": 484.482759,
"proof_based_SF": 1.238434,
"separation_load_N": 29000,
"remaining_clamp_force_N": 8100,
"conditional_torque_N_m": 52.2
},
"reference_data": {
"tensile_stress_area_mm2": 58,
"proof_strength_MPa": 600,
"source_convention": "ISO 898-1 standard table values for M10 property class 8.8; widely tabulated standard value"
},
"working": "At=58.0 mm² and Sproof=600 MPa. Fi=0.75×600×58.0=26100 N. C=100000/(100000+900000)=0.100000. Incremental bolt load=C×P=0.1×20000=2000 N. Total bolt load=26100+2000=28100 N. σ=28100/58.0=484.482759 MPa. SF=600/484.482759=1.238434. Psep=Fi/(1-C)=26100/0.9=29000 N. Remaining clamp force=Fi-(1-C)P=26100-0.9×20000=8100 N. Conditional torque T=K×Fi×d=0.2×26100×0.01=52.2 N·m."
}Failure boundary
BREAK_CLAIMED · SELF_FLAGGED
The stiffness-ratio calculation divides by kb + km and becomes undefined when the stiffness sum is zero; the instrument should reject that input. The specification also lacks the torque coefficient or a torque lookup, so recommended torque is undefined for torque-based tightening inputs.
Other records
Sources and evidence
These pointers bind the page to evidence. They do not grant authority or collapse verification into deployment.
VERIFIED_LEDGER.jsonevidence-tranche7/tranche7-results.jsonBOUNDARY_HAZARD_CATALOG.json